![background image](http://html1.mh-extra.com/html/gardner-denver/l23/l23_original-operating-and-service-manual_563814020.webp)
4 Safety Regulations
18
Danger
Safety measure required
Modifications to the machine impair
safety.
After completing repair work, always check to see whether any tools, loose
parts or cloths have been left in or on the machine, driving engine or driving
equipment.
After the work has been completed, replace any protective devices that have
been removed. Operation without protective devices is not permissible.
Always re-tighten screwed connections which were loosened for maintenance
and repair work.
Machines performing rotating movements have to be cycled several times in
order to ensure that there are no mechanical faults in the machine or the drive
member.
Before releasing the power unit for operation after maintenance or overhaul,
check that the operating pressures, temperatures and time settings are
correct and that the regulating and shutdown equipment function properly.
4.9
Dangers resulting from conversion work/modifications on the machine
Danger
Safety measure required
Genuine parts are designed especially
for the machine.
Modifications may
interfere with safety equipment or give
rise to new dangers for which protection
is not provided.
No alterations, additions, or modifications to the machine may be carried out
without the approval of the manufacturer. Unauthorized modifications to the
machine are prohibited for reasons of safety.
Original parts are specially designed for our machines. We must explicitly
point out that parts and special accessories not supplied by us are not
approved by us. Installing or using such products may thus adversely affect
active and/or passive safety.
The manufacturer accepts no liability whatsoever for damage resulting from
the use of non-original parts or special accessories.
This also applies to the installation and adjustment of safety devices and
valves as well as to welding on bearing and pressurized parts
If protective equipment is not
functioning, operating the system may
put lives at risk.
Only operate the machine when all protective devices, shutdown devices,
sound-insulating equipment and extraction equipment are in place and
working.
Safety devices, protective covers, or insulations mounted on the system must
not be removed or modified in any way.
Summary of Contents for L23
Page 2: ......
Page 61: ...12 Appendix 59 Fig 33 All dimensions in inches ...
Page 62: ...12 Appendix 60 Fig 34 All dimensions in inches ...
Page 63: ......