background image

 

13 

COMPRESSOR OIL SPECIFICATIONS 

 

Compressors are factory filled with AEON hydrocarbon based recip lubricant.  This is an ISO 100 non-
detergent industrial lubricant with rust and oxidation inhibitors specially formulated for reciprocating 
compressors.  It is recommended this compressor be maintained using this oil for ambient temperatures 
above 32°F. 

 

AEON synthetic is a premium grade diester based synthetic lubricant providing excellent performance in 
high temperature applications. 

 

CAUTION 

Do not mix oil types, weights or brands. 

 

CAUTION 

“Emulsification of oil (white milky substance) indicates unsafe accumulation of moisture and 
may be evidence compressor is oversized for application.  Failure to promptly consult your 
local distributor, or Gardner Denver Customer Service, can be grounds to deny warranty.” 

 
 

NOTES:

 

 

1.  Normal break-in period of Gardner Denver air compressors is 25 hours. 

 

2.  For the first 100 hours of compressor operation, a careful and regular check of the oil level should be 
 

made.  Maintain oil level at the full line. 

 
 

CHANGING TO SYNTHETIC LUBRICANT 

 

(Applies to diester based synthetic lubricant only) 

 

1.  Compressor must run for a 25 hour break-in period using AEON ISO 100 oil. 

 

2.  Thoroughly drain existing oil from crankcase. 

 

3.  Fill crankcase with a full charge of synthetic lubricant. 

 

4.  Run compressor for 200 hours. 

 

5.  Stop compressor and thoroughly drain the synthetic lubricant. 

 

6.  Add a full charge of synthetic lubricant. 

 

7.  Compressor now ready to run for extended period before next lubricant change. 

 

LUBRICANT

 

 

AEON  

DESCRIPTION PART 

NUMBER 

1 – Quart Case (12/case) 

28H213 

1 – Gallon Case (4/case) 

28H212 

5 – Gallon Pail 

28H211 

55 – Gallon Drum 

28H210 

 

 

AEON SYNTHETIC 

 

DESCRIPTION PART 

NUMBER 

1 – Quart Case (12/case) 

28H216 

1 – Gallon Case (4/case) 

28H215 

5 – Gallon Pail 

28H214 

 

TORQUE VALVES 

 

SPECIFIC APPLICATION 

FASTENER SIZE & THREAD 

TORQUE    INCH-POUNDS 

BEARING HOUSING BOLT 

7/16 – 20 

540 

CYLINDER FLANGE BOLT 

1/2 – 13 

900 

CONNECTING ROD BOLT 

7/16 – 20 

400 

MANIFOLD BOLT 

7/14 – 14 

230 

FLYWHEEL BOLT 

7/16 – 20 

600 

Summary of Contents for HGR7-3K

































Reviews: