![background image](http://html1.mh-extra.com/html/gardner-denver/gd150/gd150_service-manual_3718934012.webp)
Sideplate Assemblies
Page 10
Figure 8. Sideplate removal.
NO FURTHER DISMANTLING IS NECESSARY FOR BLADE REPLACEMENT- SEE
SECTION 3.
4.5 Bearing and/or Seal Removal
Key
1. M10CapScrewx3
2. Bearing Housing Cap
3. Shim(s)
4. Oil Seal
5. Bearing
6. Oil Seal
7. Circlip
8. Air Seal
The sideplate assembly contains the parts shown in Fig 9.
The sideplate dismantling method at various
stages (as appropriate) is shown below.
Figure 9, Seal/Bearing parts etc.
CAUTION
Only do this if the warranty
period has expired,
otherwise this will invalidate
any existing warranty
available.
1. Remove the lead seal from 1ofthe 3socketcap screws in the bearing
housing cap.
2. Remove the 3socketcap screws, then remove the bearing housing
cap &the shims.
Summary of Contents for GD150
