![background image](http://html1.mh-extra.com/html/gardner-denver/gd150/gd150_service-manual_3718934010.webp)
Sideplate Assemblies
Page 8
4.2 Cowl Removal and Mounting Feet Removal
To remove the drive end cowl follow 4.1, then loosen and remove the 4
socket cap screws in the corners of the cowl. The cowl and mounting
foot can now be removed.
For the non drive cowl, follow the above.
4.3 Fan Removal
CAUTION
The cooling fan is connected to the shaft by a star tolerance
ring.
Use a fan extractor as shown in fig 5, making sure that the
clamps are positioned in the arrowed portion of the fan.
Alternatively, use a mallet and A length of bar to force the
fan from the star tolerance ring by tapping on the central
boss. Discard the old star tolerance ring and replace.
The star tolerance ring must
not be re-used! A slipping
fan would result in
insufficient machine cooling.
NOTE
Protect the end of the Rotor
Shaft by using packing
against the fan extractor and
the shaft.
Figure 5. Fan removal using a fan extractor.
Summary of Contents for GD150
