![background image](http://html1.mh-extra.com/html/gardner-denver/gd150/gd150_service-manual_3718934006.webp)
Page 5
3
NOTE
Blade Replacement
If blade replacement is necessary due to product ingress or blade
breakage, remove both side plates (described in section 4) and the rotor
assembly (as described in section 5) and thoroughly clean the body and
rotor.
Routine blade replacement can normally be under taken by removal of
the non-drive end sideplate assembly only (as described in section 4).
Failure to undertake a
complete cleaning operation
may result in premature failure
of the replacement blades.
3.1 Blade Removal
See Sections:-4.2,4.3 and 4.4
See Fig 6 for machine support positions.
Worn blades are removed by sliding them outwards. The easiest
access to each blade/slot is obtained by positioning the blade at the
widest rotor to body gap (opposite the Nip). See fig 1.
NOTE
As the rotor is rotated to
access the lower slots,
support the weight of
the rotor to prevent
scoring of the body.
NOTE
Ensure that grease from dirty
hands is removed from all
blade surfaces with a cleaning
solvent prior to fitting.
NIP
Figure 1 .Blade Removal
Summary of Contents for GD150
