FIL SERIES COMPRESSED AIR FILTERS
MODELS: FIL12 through FIL30
CONTENTS
MODEL NUMBER CONFIGURATION .......................... 2
1.0 INSTALLATION .................................................... 3
2.0 OPERATION ....................................................... 5
3.0 MAINTENANCE .................................................. 6
DIMENSIONS AND WEIGHTS ..................................... 7
WARRANTY .............................................................. 8
INSTRUCTION MANUAL
General Safety Information
1. Pressurized devices
• Do not exceed maximum operating pressure indi
-
cated on serial number tag.
• Make certain filter is fully depressurized before
servicing.
2. Breathing Air
• Air treated by this equipment may not be suit
-
able for breathing without further purification.
Refer to OSHA standard 1910.134 for breathing air
requirements.
3. Flammable devices
While the materials of construction are compatible
with many flammable gases, the following application
limitations must be considered:
• Housing materials are slightly porous. The prod
-
uct must be used in a well ventilated area in the
absence of sparks or ignition sources. Do not use
in Class 1, Division 1, Group D environments.
• The type of area - forced exhaust system used
(i.e., high or low level) would be dependent on the
gas involved.
• Each application (other than for air or inert gas)
must be reviewed to minimize fire or explosion
hazard.
3150962
Rev. B 04/15
18-5-605
For Sales and Service: (800) 883-2477
Or visit Sales and Service at www.gardnerdenverproducts.com