Decommissioning
11
© Gardner Denver Deutschland GmbH
39
/
44
08.2019 · 610.44434.40.000
Decommissioning
Decommissioning
DANGER
Lethal electric shock from G-BH1 | G-BH9 with drive control!
The drive control continues to be live after the intermediate circuit voltage
has been switched off and slowly becomes de-energised.
1. After switching off, wait for
at least 3 minutes
.
2. Before opening the drive control, ensure that it is de-energised.
!
The G-BH1 | G-BH9 can remain in the unit or be dismantled for storage.
1. Disconnect the G-BH1 | G-BH9 from the power supply.
2. Depressurise the pipes.
Disassembly
1. Disconnect the G-BH1 | G-BH9 from all electrical connections.
2. Dismantle the piping and hoses.
3. Close connections that are open.
4. Loosen the G-BH1 | G-BH9 from the installation surface.
5. Store [
➙
20] or dispose of [
➙
39] G-BH1 | G-BH9.
Disposal
WARNING
Burns, chemical burns or poisoning!
Risk of injury due to contact with residual hazardous substances in the G-
BH1 | G-BH9.
Decontaminate the G-BH1 | G-BH9 as instructed by the manufacturer of the
hazardous substances.
1. Remove the G-BH1 | G-BH9 according to the repair manual [
➙
6].
2. Collect solvents, residual lacquer and grease and dispose of them in accord-
ance with the valid local regulations.
3. Dispose of components according to the valid local regulations or recycle
them.
11
11.1
11.2
11.3
Summary of Contents for Elmo Rietschle 2BH11
Page 44: ......
