Transportation and storage
4
© Gardner Denver Deutschland GmbH
19
/
44
08.2019 · 610.44434.40.000
!
The G-BH1 | G-BH9 on the compressor cover (item 0030, [
➙
14]) must be
placed horizontally for transportation with lifting attachment (item 0058, [
➙
14]).
1. Guide the lifting strap between the compressor housing (item 0002, [
➙
14])
and the motor (item 0001, [
➙
14]) through openings or on edges.
WARNING! Make sure that the lifting strap cannot slip off!
2. Lift the G-BH1 | G-BH9 until the lifting strap is taut.
3. Tilt the G-BH1 | G-BH9 with one or two people on the foot, depending on the
type.
4. Check that the eye bolt/lifting attachment is firmly fastened and retighten as
necessary.
M8:
18 – 22 Nm
(13.3 – 16.2 ft lbs)
M12:
18 – 42 Nm
(13.3 – 31.0 ft lbs)
M16:
138 – 165 Nm
(102 – 122 ft lbs)
5. Attach the crane hook to the eye bolt/lifting attachment.
6. Attach the crane hook to the eye bolt.
7. Lifting and transporting the G-BH1 | G-BH9.
8. Set the G-BH1 | G-BH9 down and, if necessary, secure from slipping and fall-
ing.
9. Remove the lifting device.
Transporting the 2BH1943 with a crane
1. Screw an eye bolt into each silencer (item 0990, [
➙
14]) - not included in
scope of delivery.
2. Attach the crane hook to the eye bolt.
3. Lifting and transporting the G-BH1 | G-BH9.
4. Set the G-BH1 | G-BH9 down and, if necessary, secure from slipping and fall-
ing.
5. Remove the lifting device.
Summary of Contents for Elmo Rietschle 2BH11
Page 44: ......
