4
Transportation and storage
610.44434.40.000 · 08.2019
18
/
44
© Gardner Denver Deutschland GmbH
Transportation and storage
Unpacking and checking the condition of delivery
The G-BH1 | G-BH9 is secured onto a pallet and protected by a cardboard box for
delivery.
1. Remove the packaging, except for the transport protection on the connection
openings.
2. Check the delivery for transport damage.
NOTICE! Report any transport damage to the manufacturer immediately.
3. Check that the delivery matches the order.
4. Remove fastening screws on the foot (item 0062, [
➙
14]).
NOTICE! The transport spring elements attached to the machine cannot
be used for the installation as they may have been damaged during
transport. Dispose of transport spring elements.
5. Dispose of packaging material in accordance with the valid local regulations.
Lifting and transporting
WARNING
Danger of crushing and cutting!
Danger of crushing and cutting of body parts due to tipping or falling loads
during transportation.
1. Only transport G-BH1 | G-BH9 in a horizontal position (exception: 2BH1943).
2. The load-bearing capacity of the lifting gear and load-handling equipment
must correspond to the mass [
➙
42].
3. Secure against tipping over or falling.
4. Do not remain under supported loads.
5. Set up the G-BH1 | G-BH9 on a stable and level surface.
NOTICE
Mechanical damage!
G-BH1 | G-BH9 can be damaged during transportation.
!
The G-BH1 | G-BH9 is designed for transport with a crane or forklift.
The G-BH1 | G-BH9 should not be exposed to impacts and blows during
transportation.
The type of transportation depends on the mass:
▪
G-BH1 | G-BH9 up to
20 kg
(44 lbs)
without
lifting attachment/eye bolt:
Transportation by hand
NOTICE! Observe the health and safety require-
ments!
▪
G-BH1 | G-BH9 over
20 kg
(44 lbs)
with
lifting attachment/eye bolt: Transpor-
tation with a crane
Transport with crane (except for 2BH1943)
!
All G-BH1 | G-BH9 with a mas of >
20 kg
[44 lbs] are equipped with a lifting
attachment (item 0058, [
➙
14]). This lifting attachment is exclusively designed
for the mass of the G-BH1 | G-BH9, including the original accessories (except
for the in-line filter, item 5202, [
➙
14].
!
The lifting attachment is exclusively designed for the mass of the G-BH1 | G-
BH9, including the original accessories (except for the in-line filter, item 5202,
[
➙
14]).
Remove the attached in-line filter before transporting the G-BH1 | G-BH9.
4
4.1
4.2
Summary of Contents for Elmo Rietschle 2BH11
Page 44: ......
