![background image](http://html1.mh-extra.com/html/gardner-denver/drum-xk-series/drum-xk-series_installation-operating-and-maintenance-manual_3595233009.webp)
Page 9
4990140010 Date:03/15
XK12 Installation, Operating & Maintenance Manual
Page 9
XK12 Installation, Operating & Maintenance Manual
Installation
Figure 6. Oil Lubrication Components
3.4 Lubrication
The XK12 is supplied complete with oil.
When the compressor has been mounted, the oil level should be re-checked
as shown in fi gure 6 and topped-up with oil through, and up to, the fi ll/level
plug hole (approximately 1.5 litres total if necessary).
Key
1 - Fill Plug washer 2 - Fill / Level Plug 5 - Magnetic Drain Plug
3 - Plug Cap 4 - Drain Plug washer
Figure 5. Mounting Details - separate ancillary packages
Alternative mounting channels
maybe neccesary due to other
vehicle ancillaries (e.g. fuel
tank). These should provide
comparative strength to the
confi guration shown.
NOTE
No.
Description
1. M16
stud (short)
2. Short Spacer
3. M16
Stud (long), Grade 8
4.
Long Spacer
5.
Mounting channels
6.
M16 Flanged Self locking nut, Grade 8
Taper washers should be
used if mounting channels
with tapered fl anges are to be
used.
NOTE
NOTE