13-8-623 Page 21
Figure 4-1 – FLOW CHART FOR SETUP PROGRAMMING – V6.
xx
8. In the top line, "REMOTE HALT" is displayed. The bottom line indicates either "TIMED" or
"IMMEDIATE". Refer to the description of "Load/Unload" later in this section for additional details.
Select the desired response to the remote input and press [ENTER] to proceed.
9. This completes the operational adjustments. The controller will return to the main adjustments menu.
Maintenance Adjustments
1. If any service advisories are in effect (yellow ADVISORY indicator is on), they will be displayed on the
top line. The bottom line indicates "LEAVE ADVISORY" (do not reset) or "CLEAR ADVISORY" (turn
it off). Select the desired action and press [ENTER] to proceed.
Note that both the "CHANGE OIL" and "CHANGE OIL FILTER" advisories are based on operating
time. These timers are not automatically reset on the controller when the advisory is turned off, and
the advisory will come back on shortly after the unit starts running. If the oil or filter has been
changed, clear the advisory as noted above, then proceed to the following steps to reset the
appropriate timer back to its full value.
300EFD1255-C
(Ref. Drawing)
Summary of Contents for AUTO SENTRY RS2000
