System Installation
Page
13
Page
12
System Installation
A second style of keypad known as the Gardtec
800 Series
compact LED keypad is
also available. To mount this keypad remove the bottom flap securing screw and
remove the bottom flap by pulling it forwards and downwards in one movement. The
front of the keypad (including the PCB) may now be removed moving the two retaining
clips inwards and lifting the cover clear of the base (see Fig 4.)
Fig 4. Gardtec
800 Series
LED Compact.
The base should be fastened to the wall in three positions using 30mm x No.6 screws
and suitable rawl plugs.
Fig 4a Contour RKP
Lower Flap to reveal single cover fixing screw
1
2
3
4
5
6
7
8
NO
9
0
YES
EOL DOUT D IN 0V +12V EE+ EE- TMP+
Retaining Clips
Fig 2a. Flap to left Standard RKP with Housing Base
Fig 2b. Flap to right Standard RKP with Housing Base
Fig 3. Flap to bottom Standard RKP with Housing Base
A
B
C
D
E
F
G
A
B
C
D
E
F
G
Use one of the longer
springs (supplied) on the
tamper switch
Use the shorter spring
(supplied) on the tamper
switch
GARDTEC
800 Series
GARDTEC
800 Series
A
B
C
D
E
F
G
Use one of the longer
springs (supplied) on the
tamper switch
4344R12.qxd 03/09/99 11:09 Page 12
