AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
31
41cc Petrol Chainsaw – GLPC 41
Safety
– Keep a good firm grip on the saw with both hands, the
right hand on the rear handle, and the left hand on the
front handle, when the engine is running. Use a firm grip
with thumbs and fingers encircling the chainsaw handles.
A firm grip will help you reduce kickback and maintain
control of the saw. Don't let go.
– Make sure that the area in which you are cutting is free
from obstructions. Do not let the nose of the guide bar
contact a log, branch, or any other obstruction which could
be hit while you are operating the saw.
– Cut at high engine speeds.
– Do not overreach or cut above shoulder height.
– Follow the manufacturer's sharpening and maintenance
instructions for the saw chain.
– Only use replacement bars and chains specified by the
manufacturer or the equivalent.
– If the equipment becomes jammed when cutting, switch
it off immediately and free it carefully. Finally, check the
equipment for damage (e.g. a bent chain bar) and carry
out a test run.
8. Safe operation
– The safety, working and maintenance notes of the
manufacturer as well as the dimensions specified in the
technical data must be complied with.
– Applicable accident prevention regulations and other
generally recognised safety rules must be complied with.
– The operator must be informed about factors affecting the
release of debris and dust, e.g. the type of wood being cut,
dust in dry conditions and the correct configuration of the
chain and chain bar.
Summary of Contents for GLPC 41
Page 72: ......
