AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
60
41cc Petrol Chainsaw – GLPC 41
Maintenance and servicing
Spark plug (Fig. 24b)
NOTICE!
To ensure that the saw's engine retains its power, the spark
plug must be clean and have the correct electrode gap
(0.6 mm). The spark plug must be cleaned or replaced after
every 20 hours of service.
1. Set the On/Off switch to Stop (0).
2. Remove the top cover (Fig. 24a/pos. A) by undoing the cover fastening screw (Fig. 24a/
pos. B) on the cover. You can then remove the cover (Fig. 24a/pos. A).
3. Disconnect the ignition cable (Fig. 24b/pos. D) from the spark plug by pulling and
twisting it simultaneously.
4. Remove the spark plug using the supplied spark plug wrench (Fig.4/pos. 22).
DO NOT
USE ANY OTHER TOOLS.
5. Clean the spark plug with a copper wire brush and refit it, or fit a new spark plug. Then
replace the top cover.
Fig.25
A
B
B
A
Fig. 24a
D
C
Fig. 24b
Summary of Contents for GLPC 41
Page 72: ......
