![background image](http://html1.mh-extra.com/html/gardenline/glpc-40/glpc-40_user-manual_3533575016.webp)
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8073
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8073
22
23
17
16
18
19
20
21
Note:
To stop the engine in an emergency, activate the chain
brake and switch the ON/OFF switch to “Stop (0)”.
General cutting instructions
Important:
Felling trees is prohibited without the necessary
training!
Felling
Felling is the term for cutting down a tree. Small trees up to
6-7 inches (15-18cm) in diameter are usually cut in a single
cut. Larger trees require notch cuts. Notch cuts determine the
direction the tree will fall.
Warning:
A retreat path (A) should be planned and cleared as
necessary before cuts are started. The retreat path should
extend back and diagonally to the rear of the expected line of
fall, as illustrated in Fig. 21.
Warning:
If felling a tree on sloping ground, the chain saw
operator should keep on the uphill side of the terrain, as the
tree is likely to roll or slide downhill after it is felled.
Note:
Direction of fall (B) is controlled by the notching cut.
Before any cuts are made, consider the location of larger
branches and natural lean of the tree to determine the way
the tree will fall (Fig. 21).
Warning:
Do not cut down a tree during high or changing
winds or if there is a danger to property. Consult a tree
professional. Do not cut down a tree if there is a danger of
striking utility wires; notify the utility company before making
any cuts.