![background image](http://html1.mh-extra.com/html/gardenline/glpc-40/glpc-40_user-manual_3533575015.webp)
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8073
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8073
20
21
39cm cutting length
Semi automatic choke assisting start up
21m/s chain speed
400ml fuel tank capacity
Mixer bottle included
Features
5
Operation
Starting the engine
1
Set the On/Off switch (A) to “On (I)” to start the machine
(Fig. 16).
2
Pull out the throttle lever (B) (Fig. 17) until it locks.
3
Push the primer bulb (C) 10 times (Fig. 18).
4
Place saw on a firm, flat surface. Hold saw firmly as
shown. Pull starter rapidly 2 times. Beware of moving
chain! (Fig. 19)
5
Push in the throttle lever (B) as far as it will go (Fig. 17).
6
Hold saw firmly and pull starter rapidly 4 times. Engine
should start (Fig. 19).
7
Let the engine run for 10 seconds to warm up. Press
the throttle lever (D) briefly, the engine will go to “idling”
speed (Fig. 20). If engine failed to start, repeat
these instructions.
Important:
Always pull the starter cable slowly until you feel
the initial resistance before you then pull it quickly to start the
engine. Do not allow the starter cable to whip back of its own
accord.
Restarting a warm engine
1
Make sure the switch is in the ON position.
2
Pull the starter rope rapidly 6 times. The engine
should start.
To stop engine
1
Release trigger and allow engine to return to idle speed.
2
Move STOP switch down to stop engine.
Instructions
6