Gardenline 702316 Original Instructions Manual Download Page 28 | Manualshive

Page: 28 / 56

background image

25

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

(toll free)

AFTER SALES SUPPORT

(toll free)

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

Preparing the pole saw

WARNING. The pole saw must never be operated without saw

chain oil, as this will damage the pole saw and the motor.

NOTE:

You have to buy the saw chain oil separately, it is not included. The oil

level must also be checked regularly during work.

Filling the oil tank

1) Remove the battery packs if you have already

installed the battery packs.
2) Open the oil tank cap (28) by turning it anti-

clockwise. (Fig. G1)
3) Fill a maximum of 135ml of saw chain oil into the

oil tank (32).
4) Replace the oil tank cap (28) and tighten by turning

it clockwise.
5) Check the oil level regularly and fill the oil tank with

saw chain oil if necessary.
6) To reduce or increase the oil flow from the oil tank

to the chain, turn the oil adjustment screw (34). Turn

it clockwise to increase and anti-clockwise to reduce

the oil flow to the chain. (Fig. G2)

WARNING. Remove all saw chain oil from

the oil tank if you are not going to use the

pole saw for a long time. The oil tank should also be emptied before the

pole saw is transported.

Adjusting the chain tension

WARNING. A saw chain that is not sufficiently tensioned or a saw

chain that is too tensioned can cause serious injuries and damage

to property.
NOTE: Check the chain tension before each use and adjust if necessary.

The pole saw is fully assembled when delivered, including guide bar and saw

chain.
Adjusting the chain tension as follows:

G1

G2

«
...
26
27
28
29
30
...
»

Summary of Contents for 702316

























































Reviews:

No comments

Related manuals for 702316

Brand: Makita Pages: 3

Brand: Okay Pages: 26

Brand: Yard-Man Pages: 56

Brand: AL-KO Pages: 252

Brand: Lightronics Pages: 6

Brand: Echo Pages: 23

DORAGON Premium Series

Brand: Nakayama Pages: 26

Maestro Wireless MRF2-3LD

Brand: Lutron Electronics Pages: 11

N1F-GT-250/18-D

Brand: ALDI Pages: 37

Brand: FLORABEST Pages: 52

Brand: Worx Pages: 32

Brand: Worx Pages: 28

Brand: Worx Pages: 140

Brand: Parker Pages: 41

Brand: Gtech Pages: 20

Brand: TOOLCRAFT Pages: 60

Brand: Grizzly Pages: 144

Brand: MasterCraft Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands