Gardenline 702316 Original Instructions Manual Download Page 12

Page: 12 / 56

Exposure to fire or temperature above 130 °C may cause explosion.

g) Follow all charging instructions and do not charge the battery pack

or tool outside the temperature range specified in the instructions.

Charging improperly or at temperatures outside the specified range may

damage the battery and increase the risk of fire.

6) Service

a) Have your power tool serviced by a qualified repair person using only

identical replacement parts.

This will ensure that the safety of the power

tool is maintained.

b) Never service damaged battery packs.

Service of battery packs should

only be performed by the manufacturer or authorized service providers.

Hedge trimmer safety warnings:

a) Keep all parts of the body away from the blade. Do not remove cut

material or hold material to be cut when blades are moving.

Blades

continue to move after the switch is turned off. A moment of inattention

while operating the hedge trimmer may result in serious personal injury.

b) Carry the hedge trimmer by the handle with the blade stopped and

taking care not to operate any power switch.

Proper carrying of the

hedge trimmer will decrease the risk of inadvertent starting and resultant

personal injury from the blades.

c) When transporting or storing the hedge trimmer, always fit the blade

cover.

Proper handling of the hedge trimmer will decrease the risk of

personal injury from the blades.

d) When clearing jammed material or servicing the unit, make sure

all power switches are off and the battery back is removed or

disconnected.

Unexpected actuation of the hedge trimmer while clearing

jammed material or servicing may result in serious personal injury.

e) Hold the hedge trimmer by insulated gripping surfaces only, because

the blade may contact hidden wiring.

Blades contacting a “live” wire may

make exposed metal parts of the hedge trimmer “live” and could give the

operator an electric shock.

f) Keep all power cords and cables away from cutting area.

Power cords or cables

may be hidden in hedges or bushes and can be accidentally cut by the blade.

g) Do not use the hedge trimmer in bad weather conditions, especially

when there is a risk of lightning.

This decreases the risk of being struck by

lightning.

Summary of Contents for 702316

























































Search results

Summary of Contents for 702316

Reviews:

Related manuals for 702316

Brands by name

Popular brands

Gardenline 702316, Original Instructions Manual

Search results

Summary of Contents for 702316

Reviews:

Related manuals for 702316

Brands by name

Popular brands