Gardenline 702316 Original Instructions Manual Download Page 18 | Manualshive

Page: 18 / 56

background image

Safety Warnings for battery pack

a) Do not dismantle, open or shred cells or battery pack.

b) Do not short-circuit a battery pack. Do not store battery packs

haphazardly in a box or drawer where they may short-circuit each other

or be short-circuited by conductive materials.

When battery pack is not

in use, keep it away from other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can make a connection from

one terminal to another. Shorting the battery terminals together may cause

burns or a fire.

c) Do not expose battery pack to heat or fire. Avoid storage in direct

sunlight.

d) Do not subject battery pack to mechanical shock.

e) In the event of battery leaking, do not allow the liquid to come into

contact with the skin or eyes. If contact has been made, wash the

affected area with copious amounts of water and seek medical advice.

f) Seek medical advice immediately if a cell or battery pack has been

swallowed.

g) Keep battery pack clean and dry.

h) Wipe the battery pack terminals with a clean dry cloth if they become

dirty.

i) Battery pack needs to be charged before use. Always refer to this

instruction and use the correct charging procedure.

j) Do not maintain battery pack on charge when not in use.

k) After extended periods of storage, it may be necessary to charge

and discharge the battery pack several times to obtain maximum

performance.

l) Battery pack gives its best performance when it is operated at normal

room temperature (20 °C ± 5 °C).

m) When disposing of battery packs, keep battery packs of different

electrochemical systems separate from each other.

n) Recharge only with ALDI Xfinity 20V Charger/s. Do not use any charger

other than that advised for use with the equipment. A charger that is

suitable for one type of battery pack may create a risk of fire when used

with another battery pack.

15

«
...
16
17
18
19
20
...
»

Summary of Contents for 702316

























































Reviews:

No comments

Related manuals for 702316

Brand: GreenWorks Pages: 128

Brand: Echo Pages: 30

Brand: GreenWorks Pages: 137

Brand: Poulan Pro Pages: 51

Brand: Ikra Pages: 92

DORAGON Premium Series

Brand: Nakayama Pages: 26

Brand: Cramer Pages: 135

Brand: Clas Ohlson Pages: 60

Brand: McCulloch Pages: 20

Brand: FLORABEST Pages: 116

FHS 1555 Ultralight

Brand: Okay Pages: 36

Poulan Pro 545192174

Brand: Poulan Pro Pages: 2

Brand: Poulan Pro Pages: 14

Brand: Poulan Pro Pages: 17

Brand: Poulan Pro Pages: 19

Brand: Poulan Pro Pages: 15

Brand: Poulan Pro Pages: 7

Brand: McCulloch Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands