Maestro Wireless
R
dimmers contain APM features that allow the user to customize their control to meet their
specific needs. This document serves as a supplement to the instruction sheet. APM features apply to only those
products with M4 revision software or later while System Configuration Mode (SCM) features apply to those
products with M6 revision software or later. Please note that the software revision level can be found on the
outside of the unit and will always start with the letter M. Before entering either mode, it is important to have a
good understanding of the features included. For a summary of these features and further instructions, see the
pages corresponding to your product.
Dimmer
B
R
L
F
Key
B
= Tap Button
R
= Raise Rocker
L
= Lower Rocker
F
= Front Accessible
Service Switch (FASS
T
)
Pull OFF/Push ON
Note
: The MRF2-3LD and MRF2-3PD products do not have a FASS
T
. In order to cycle power please follow
the steps below:
1. Unplug the Maestro Wireless
R
device from the wall outlet.
2. Wait for 3 seconds.
3. Plug the Maestro Wireless
R
device into a standard wall outlet.
B
R
L
Lamp Dimmer
COOPERSBURG, PA 18036 USA
®
MRF2-3PD
Wireless
®
B
R
L
Plug-In Dimmer
Maestro Wireless
R
Advanced Programming Mode (APM)
Application Note #370
Revision C
June 2012
Lutron Technical Support Center
1.800.523.9466
