background image

1800 909 909 

www.globalpowerbrands.com      email: [email protected] 

AFTER SALES SUPPORT 

43671

9

2

General Information & Safety Instructions

•  Ensure the hedge trimmer is switched off and is cool before cleaning and 

maintenance.

•  If you are interrupted when operating the trimmer, switch off before  

looking up.

•  Never allow untrained users or children to use the trimmer.
•  Use good quality air cooled 2-stroke engine oil.
•  Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. 

Do not smoke when filling fuel tank.

•  Wear goggles
•  Wear earmuffs
•  Wear a breathing mask  

•  Keep all parts of your body away from the cutting blade. Do Not remove cut 

material or hold material to be cut when blades are moving. Make sure the 
switch is off and the motor is NOT running when clearing jammed material.  
A moment of inattention while operating the hedge trimmer may result in 
serious personal injury.

•  Carry the hedge trimmer by the handle with the cutter blade and motor 

stopped. When transporting or storing the hedge trimmer, always fit the 
cutter device cover. Proper handling of the hedge trimmer will reduce possible 
personal injury from the cutter blade.

•  Prior to cutting with the hedge trimmer, always check the area to be cut for 

hidden objects. Be observant for fencing wire, Garden stakes, or electrical 
cables. Ensure to remove any of these objects prior to starting.

•  Do not use the hedge trimmer in poor weather conditions.
•  Do not use the hedge trimmer in poor light.
•  Always use both hands when operating the hedge trimmer, one on the rear 

handle and the other on the front handle.

Summary of Contents for 43671/HTKS26

























Reviews: