background image

1800 909 909 

www.globalpowerbrands.com      email: [email protected] 

AFTER SALES SUPPORT 

43671

3

Introduction

Your new Gardenline

®

 hedge trimmer will more than satisfy  

your expectations. It has been manufactured under stringent 
Gardenline

®

 Quality Standards to meet superior performance 

criteria.

You will find your new hedge trimmer easy and safe to operate, and, with proper 
care, it will give you many years of dependable service.

 CAUTION. 

 Carefully read through this entire instruction manual before using 

your new Gardenline

®

 hedge trimmer. Take special care to heed the Cautions and 

Warnings.
Your Gardenline

®

 hedge trimmer has many features that will make your job faster 

and easier. Safety, performance, and dependability have been given top priority in 
the development of this hedge trimmer, making it easy to maintain and operate.

Environmental protection

Recycle unwanted materials instead of disposing of them as waste.  
All tools, hoses and packaging should be sorted, taken to the local 
recycling centre and disposed of in an environmentally safe way.

1

What your 3 year warranty means

Great care has gone into the manufacture of this product and it should 
therefore provide you with years of good service when used properly.  
In the event of product failure within its intended use over the 
course of the first 3 years after the date of purchase, we will remedy 
the problem as quickly as possible once it has been brought to our 
attention. In the unlikely event of such an occurrence, or if you require 
any information about the product please contact us via our after sales 
support services, details of which can be found in this manual and on 
the product itself.
After Sales Support      TEL: 1800 909 909

YEAR WARRANTY

Summary of Contents for 43671/HTKS26

























Reviews: