24
Brake lever
1.
Pull the brake lever
(2)
towards the handle
(1)
and hold it in position when
starting the engine. Keep it tightened during operation (Fig. 19).
2.
Release the brake lever
(2)
to stop the engine.
Fig. 19
Drive lever (self-propelled function)
Use the self-propelled function as assistance during operation; the rear wheels
are automatically driven by the engine; you do not need to push the product
manually.
1.
Pull the drive lever
(3)
towards the handle
(1)
to engage the rear wheels
Release the drive lever
(3)
to disengage the rear wheels.
Throttle lever
The throttle lever
(4)
is located on the left side of upper handle bar. It is used to
control the engine speed.
1.
Move the throttle lever
(4)
upward to decrease the speed (Fig. 20).
WARNING! Do not suddenly release the recoil starter handle! Allow
the rope to return slowly and in a controlled manner each time it is
pulled! Do not pull out the recoil starter beyond the red colour band
at the end of the recoil starter!
1
2
3
4