35
5.
Secure the product to prevent it from slipping or falling over, loss of fuel,
damage and injury.
Troubleshooting
Troubleshooting
Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING! Only perform the steps described within these
instructions! All further inspection, maintenance and repair work
must be performed by an authorised service centre or a similarly
qualified specialist if you cannot solve the problem yourself!
Problem
Possible cause
Solution
1. Engine does not
start
1.1.
Not enough fuel in fuel
tank
1.1.
Add fuel
1.2.
Spark plug is wet
1.2.
Dry spark plug
1.3.
Spark plug is damaged 1.3.
Replace spark plug
1.4.
Spark plug connector
lose
1.4.
Attach properly
2. Engine stops
2.1.
Not enough fuel in fuel
tank
2.1.
Add fuel
2.2.
Cutting device is
blocked
2.2.
Remove blockage
3. Unsatisfactory
result
3.1
Cutting device dull
3.1
Sharpen or replace
the cutting device
3.2
Height of grass
exceeds capacity
3.2
Only cut grass to the
capacity of the
product
3.3
Cutting height is
3.3
Adjust cutting
