14
Disconnect the spark plug connector
from the spark plug!
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
Handle bars
1.
Align the lower handle bars
(9)
with the handle support
(13)
. Make sure the
holes in the lower handle bar correspond with those in the support.
2.
Secure the lower handle bars
(9)
with the bolts
(13b)
to the handle support
(13)
. Fix with the knobs
(13a)
(Fig. 1).
Fig. 1
3.
Quick fix handle
(A)
with the holes of the upper handle bars. Knobs
(B)
fix
with the lower handle bars
(9)
(Fig. 2).
Fig.2
.
NOTE: Only tighten the knob so that it is possible to push the
lever down with light pressure. If the lever cannot be pushed
down, slightly loosen the knob. If the lever can be pushed down
without resistance, tighten the knob.
A
B
9
9
13
13a
13b
