14
GB
Storage :
Fault Possible
cause
Remedy
The Turbotrimmer
Filament cassette empty.
v
Replace the filament cassette
no longer cuts.
– see 5. Maintenance
“Replacing the filament
cassette” ).
Filament too short, drawn into
v
Pull the filament out of the
the cassette or stuck together.
filament cassette (see above).
Automatic filament feed is not
v
Clean the filament cassette
working since the automatic
and area around the
mechanism lever is jammed.
cassette (see above).
If you have any other problems please contact the GARDENA Customer Service.
7. Storage
The Turbotrimmer must be stored out of the reach of children.
v
Store your Turbotrimmer in a dry place where it is protected
from frost.
Recommended storage :
We recommend that you hang your Turbotrimmer from the cable
lock. Hanging storage helps avoid unnecessary stress on the
cutting head.
The product must not be added to normal household waste. It
must be disposed of properly.
8. Technical Data
smallCut (Art. 2401)
Motor power consumption
230 W
Mains voltage /
mains frequency
230 V / 50 - 60 Hz
Filament thickness
1.6 mm
Cutting width
230 mm
Filament supply
6.0 m
Filament feed
Fully automatic
Weight
1.6 kg
Rpm of filament cassette
12,000 rpm
Work area related emission
characteristic value L
pA
1)
85 dB (A)
Noise level L
WA
2)
measured 92 dB (A) / guaranteed 94 dB (A)
Hand / arm vibration a
vhw
1)
< 2.5 m / s
2
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC
Disposal :
(in accordance with
RL2002/96/EC)
