background image

CABLES - IMPORTANT

Use only 1.00mm

2  

size cable up to 40 metres length

maximum.   

Maximum rating :

1.00mm

2  

size cable, 10 amps 250 volts AC.

YOUR PRODUCT IS SUPPLIED WITH AN
ELECTRIC MAINS CABLE FITTED WITH A
FEMALE CONNECTOR.

1. All Mains Cables and Extension Cables are available

from your local Approved Service Centre.  

2. Do not wire an extension cable directly to your

product yourself.  Please contact your local
Approved Service Centre for further information on
the connectors and kits available.

3. Only use extension cables specifically designed for

outdoor use.

CONNECTORS - IMPORTANT

Our connectors are suitable for use with 2 core cable
only.  Under no circumstances should these
connectors be used for earthed products.

All connectors and cables are of splashproof
construction.  They are not waterproof and must not
be left outside permanently nor should they be
submerged or immersed in water.  Do not let cable
lay or trail through pools of water or splashed with
water from hose pipes.

MAINS PLUG REPLACEMENT - IMPORTANT
• If the plug supplied is cut off it should be

destroyed. There is an electric shock hazard if a
cut off plug is inserted into a 13 amp socket.

1.

No earth required. 

Flymo products are double

insulated to EN60335  and under no circumstances
should an earth be connected to any part of the
product.

2.

Ensure the mains voltage suits your product

3.

IMPORTANT!  

The wires in the mains lead are coloured in
accordance with the following code:
BLUE        -     NEUTRAL
BROWN    -     LIVE
The wire which is coloured BLUE must be connected
to the Terminal which is marked with the letter 'N' or
coloured BLACK.  
The wire which is coloured BROWN must be
connected to the Terminal which is marked with the
letter 'L' or coloured RED. 

4. It is important that the outer sheath is clamped

correctly into the 3-pin plug. 

5. If in doubt consult your local Service Repairer or

qualified electrician before the machine is used.  

6.

A 13 Amp fuse must be fitted to the Mains Plug.   

7. The normal plug fuse and household fuse only

protect the electrical equipment and are not a
safeguard against electrocution.

Cables

IMPORTANT INFORMATION

When received from the
Manufacturer, the wheels are
in a raised position.
Do not switch on the product
before removing from the
raised position into position 5.

A

Roller Assembly

B1

• Do not clip the roller together before

placing over the location pegs

1. Turn product over.
2. Place both halves of the roller over the

location pegs as illustrated in 

fig.B1

3. Clip the roller together to secure it into

position.

(B2)

B2

PAGE 3

Where to Use Your GARDENA PowerMax 36 E/42 E Mower

The GARDENA mower is designed for cutting lawns
in and around the garden.
Do not use the mower on a slope steeper than 20°
maximum.

To prevent injury, the mower must not be used for
trimming bushes, hedges, shrubs, for cutting and
pruning of climbers or grass on roofs or in balcony
boxes.  In addition, the mower must not be used for
chopping up branches, twigs or for levelling
irregularities in the soil.

Summary of Contents for Powermax 42 e













Reviews: