Environmental Information
Husqvarna UK Ltd. products are manufactured
under an Environmental Management System (ISO
14001) using, where practical, components
manufactured in the most environmentally
responsible manner, according to company
procedures, and with the potential for recycling at
the end of the productsʼ life.
• Packaging is recyclable and plastic components
have been labelled (where practical) for
categorised recycling.
• Awareness of the environment must be
considered when disposing of ʻend-of-lifeʼ product.
• If necessary, contact your local authority for
disposal information.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local council office, your
household waste disposal service or the shop where
you purchased the product.
Fault Finding Hints
Fails to Operate
1. Is the correct Starting procedure being followed?
See ʻTo Start your Lawnmowerʼ
2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
Poor Grass Collection
1. Disconnect from the mains electricity supply.
2. Clean the outside of the air intakes, the discharge
chute and the underside of the deck
.
3. Raise to a higher height of cut. See Cutting Height
Adjustment.
4.
If poor collection persists.
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it with a new
one.
4. If vibration persists?
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
Lawnmower becomes heavy to push
1. Disconnect from the mains electricity supply.
2. In long grass or uneven ground, the height of cut
should be raised to a higher position. See Cutting
Height Adjustment.
3. Check that the wheels and rollers can rotate freely.
4. If problem persists?
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
Service Recommendations
1. We strongly recommend that your product is
serviced at least every twelve months.
2. Always use genuine Spare Parts.
3. Prepacked spares are available from most
Husqvarna UK Ltd. stockists.
4. Your product is uniquely identified by a silver and
black product rating label
5. If you have a problem with your machine contact
your local Approved Service Centre ensuring you
have full details of your product as described on
the product rating label.
6.
Should it be necessary for work to be carried
out by your Service Centre, it is important to
take your complete machine including cable
and any extension cables used.
A network of specialist dealers can be found in your
local Yellow Pages. To obtain service on your
product simply telephone or visit your local Service
Centre. Should you require service under the terms
of our guarantee the Service Centre will require
proof of purchase.
All of the centres listed stock genuine Spare
Parts.
NOTE: Our Service Repairers act on their own
behalf and are not empowered to commit or
legally bind Husqvarna UK Ltd. in any manner
whatsoever.
PAGE 9
