background image

PAGE 8

Caring for your Lawnmower

Cleaning
• USE GLOVES
• IMPORTANT:- 

It is very important that you

keep your lawnmower clean.  Grass clippings
left in any of the air intakes or under the deck
could become a potential fire hazard.

1. Remove grass from under the deck with brush.

(S1)

2. Using a soft brush - remove grass clippings

from all air intakes 

(S2)

, the discharge chute

(S3)

and the grass box 

(S4)

.

3. Using a soft brush, remove grass clippings

from the vision window 

(S5)

.

4. Wipe over the surface of your lawnmower with

a dry cloth 

(S6)

.

• IMPORTANT:- 

Never use water for cleaning

your lawnmower.  Do not clean with chemicals,
including petrol, or solvents - some can
destroy critical plastic parts.

Storing your Lawnmower: 

• Loosen the Cam Locks to enable the handles

to be folded over the product 

(T)

.

• Store in a dry place where your lawnmower is

protected from damage

At the End of the Mowing Season

1. Replace bolts, nuts or screws, if necessary.
2. Clean your lawnmower thoroughly.
3. Make sure that the electric cable is stored 

correctly to prevent damage.

S1

S2

S3

S4

S5

S6

T

Your product can be used to cut grass using
the following methods:-

1.

Grassbox Fitted:-

grass is collected effectively

and compacted into the grassbox. 

(P)

3.

Mulch Plug Fitted:-

grass cuttings are finely

chopped to return nutrients to your lawn 

(Q)

.

See ʻMulching Plugʼ on page 7.

2.

Rear Discharge:-

Effectively cuts long grass

with no need to empty the grassbox 

(R)

How to Mow

1. Start mowing the edge of the lawn nearest to

the power point so the cable is laid out on the
lawn you have already cut.

2. Mow twice a week during the growing season,

your lawn will suffer if more than a third of its
length is cut at one time

Do Not Overload Your Mower

Mowing long thick grass may cause the motor
speed to drop, you will hear a change in the
motor sound.  If the motor speed drops you may
overload your lawnmower which may cause
damage.  When mowing in long thick grass a first
cut with the cutting height set higher will help
reduce the load. See Cutting Height Adjustment.

How to Mow

P

R

Q

Summary of Contents for Powermax 42 e













Reviews: