Problem
Possible Cause
Remedy
The filament consumes
quickly
Frequent contact between the
filament and hard objects.
v
Avoid contact between the
filament and hard objects.
The trimmer stops.
Error-LED
ß
W
flashes
Battery overload.
v
Wait for 10 sec. Press button
ß
B
on the battery and restart.
High temperature. The allowed
operation temperature was
exceded.
v
Leave battery to cool for
approx. 15 min. Press button
ß
B
on the battery and restart.
Charging indicator lamp
9
on
the charger does not light up
Battery charger or charging
cable not plugged in properly.
v
Plug in battery charger and
charging cable properly.
Charging control lamp
9
on the charger flashes rapidly
(twice per second)
Charging error.
v
Unplug charger and plug
in again.
The trimmer stops.
Error-LED
ß
W
flashes
Battery error /
battery defective.
v
Press button
ß
B
on the
battery and restart.
The battery can no longer
be charged
Battery is defective.
v
Replace the battery
(Art. No. 9840).
Only an original GARDENA BLi-18 Replaceable Battery (Art. No. 9840) may be used.
This can be obtained from your GARDENA dealer or directly from GARDENA Service.
For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
9. Available accessories
GARDENA
Replacement Battery BLi-18
Battery for additional operating time or
for replacement with 2.6 Ah.
Art. No. 9840
GARDENA Filament Cassette
for Turbotrimmer
Art. No. 5306
10. Technical Data
Turbotrimmer
EasyCut Li-18/23
(Art. No. 9824)
Filament thickness
1.5 mm
Cutting width
230 mm
Filament supply
10 m
Filament feed
Fully automatic
Rpm of filament cassette
approx. 8500 rpm
Weight including battery
approx. 2.8 kg
Workplace-related
emission values L
pa
1)
Uncertainty k
pa
68 dB (A)
3 dB (A)
23
GB
