Adjusting the plant guard:
ö
ö
Working position
Parking position
v
Turn plant guard
ö
through 90° into the required position
until it locks into place.
Starting the trimmer:
a
p
Switching the trimmer on:
1. Press and hold the safety lock
p
and then press the start
button
a
on the handle.
2. Release the safety lock
p
again.
Switching the trimmer off:
v
Release the start button
a
on the handle.
Lengthening of the filament
(automatic):
A clean cut is achieved only with the maximum filament
U
length.
V
U
The cutting filament
U
is
lengthened automatically when the
filament cassette comes to a
standstill after switch off.
As the filament can only be lengthened in small increments, it can
be necessary in some cases to repeat the switch-off / switch-on
action several times (up to 6 times). Important is that the filament
cassette comes to a complete standstill each time.
The cutting filament has been sufficiently lengthened when,
after switch-on, it audibly strikes the filament limiter
V
.
The filament cassette has to be replaced (GARDENA Replacement
Filament Cassette Art. No. 5306) when the cutting filament has
been used up.
6. Storage
To put into storage:
Store out of the reach of children.
1. Charge battery.
2. Store your Turbotrimmer in a dry place where it is protected
from frost.
Recommendation:
The trimmer can be suspended by the handle.
The trimmer head is not placed upon any unnecessary strain
if stored in a suspended manner.
Disposal:
(in accordance with
RL 2012/19/EU)
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
v
Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
20
GB
