TZ OPTIC FIBER 400 INNOMINABILE
Use and maintenance manual
Rev. 02/18 - UK
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
22
the “fixed” type. In such case, provide with a con-
nector that allows disconnecting the device at any
time.
WARNING
There is a risk of explosion if the battery is re-
placed by one with the incorrect type: use only
original batteries. Dispose of used batteries in
accordance with the applicable regulations and
bring them in the appropriate collection cen-
ters.
4.5 TOOLS
The tools installed on the disc are called peak (1
Fig. 11) and consist of a steel body molded in hi-
ghcarbon on which it is inserted in the hard metal
tip sintered at very high hardness; in this way you
get a tool with exceptional durability and service
life, even in the toughest conditions. Ideal on very
dry and/or stony ground.
They are all the same and are locked in place with
a Seeger ring (2 Fig. 11).
4.6 SET-ASIDE
If you plan a long period of inactivity, in order to ke-
ep the machine intact in its organs, it is necessary
to park the machine on a firm, flat surface and wi-
thin a protected area, in order to prevent unauthori-
zed outsiders can approach indoor and do the fol-
lowing:
- Thoroughly wash the machine above ground and
then dry;
- Check that the machine is in perfect condition
and replace worn or broken parts;
- Protect all unpainted metal parts with lubricants,
then cover the machine with a sheet of plastic and
put it in a dry place.
If these operations are carried out carefully, the
advantage will be of those who will use the ma-
chine upon return to work.
Fig. 10 - Battery housing
Fig. 11 - Tools
1) Tool to peak - 2) Seeger ring
Fig. 10 /bis- Remote control battery
