Use and maintenance manual
Rev. 02/18 - UK
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
29
TZ OPTIC FIBER 400 INNOMINABILE
6) Unscrew the toothed wheel screw
7) Grasping the toothed wheel gently pull (without
use other tools) until the wheel and the track are
pulled out
5.5.4 TRACK ASSEMBLY
Also for the assembly of the track it is necessary to
bring the machine on a firm and level ground, lift
the machine in safety conditions by placing some
stable supports under the undercarriage frame a-
ble to support the whole and proceed to the as-
sembly operations of the track .
1) Insert the track on the idler wheel of the under-
carriage, then engage the track links with the too-
thed wheel and gently reinsert the toothed wheel
onto the hydraulic motor shaft.
Take care to correctly insert the toothed wheel on
the shaft, matching the two parts.
2) Fix the toothed wheel with the appropriate
screw
3) Loosen and remove the clamping tool.
4) remove the pins
5) Adjust the track tension (see paragraph 5.5.2
Track tensioning).
6) Remount the cover
7) Rest the tracked undercarriage on the ground.
