de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
1.
General information
Read and observe the operating instructions, keep them as a reference for later and ensure they are accessible at
all times.
2.
Safety
2.1.
SYMBOLS AND MEANS OF REPRESENTATION
Warning symbols
Meaning
DANGER
Indicates a hazard which if not avoided will lead to death or
serious injury.
2.2.
CABLE REEL
DANGER
Electrically live components
Risk of injury when installing electrically live components.
»
Before starting any installation or maintenance work, disconnect the device from the mains power supply.
»
Electrical installation, maintenance and repair work may be performed only by a trained specialist for electro-technical
work.
»
Before installation, check whether an earth is required.
»
For indoor use only.
»
If power cables or sockets are damaged, do not continue to use the device.
»
Do not store liquids in the vicinity of electrically live components.
»
Do not connect devices in series.
»
Do not plug in or unplug with wet or damp hands.
»
With type F plugs and type F sockets for use in the 230 volt power supply.
2.3.
INTENDED USE
For installation on the roller cabinet or ToolTruck.
Mobile power supply for LED lamps 914870, 914871, 914872, 914873.
Built-in extension cable for use in all power supply systems with CEE 7/4.
Two 250-V sockets for running external power consumers.
For use indoors.
For work in industrial environments.
2.4.
REASONABLY FORESEEABLE MISUSE
Cannot be combined with additional drawer.
Do not carry out any unauthorised modifications.
Do not use in potentially explosive atmospheres.
Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
Do not expose to strong vibrations or high levels of humidity or mechanical stress.
2.5.
PERSONNEL QUALIFICATIONS
Trained specialist for electro-technical work
A trained electrician in terms of this document is a person who has been respectively trained and who possesses the skills
and experience to recognise and avoid the dangers of working with electricity.
2.6.
PERSONAL PROTECTIVE EQUIPMENT
Comply with the national and regional regulations for safety and accident prevention. Protective equipment such as safety
shoes and safety gloves appropriate for the risks associated with the intended activities must be selected, provided and
worn.
3.
Nameplate
i
The appearance of the nameplate may vary. In such cases, take the data from the relevant sections.
1
Manufacturer
6
Rated power of cable when fully unwound
2
CE mark
7
Rated current of cable when fully unwound
3
Nominal voltage
8
Cable length / cable type
13