Garage Tek GT7008A, Installation Manual

Page: 9 / 16

48"
48"
48"
4FT X 8FT OVERHEAD
STORAGE RACK
CORNER
RAIL ASSEMBLY
CEILING BRACKET
CENTER
RAIL ASSEMBLY
48" 48"
4FT X 4FT OVERHEAD
STORAGE RACK
CEILING
BRACKET
CORNER
RAIL ASSEMBLY
R
DETAIL R
SCALE 1 : 8
SCREW OR
ANCHOR
SCREW OR
ANCHOR
RAIL ASSEMBLY
IN BETWEEN
ALWAYS ATTACH THE RAIL ASSEMBLY IN BETWEEN THE (2)
SCREWS OR ANCHORS FASTENEDTO THE CEILING BRACKET.
DO NOT ATTACH THE RAIL ASSEMBLY TO ONE SIDE OF THE SCREWS OR
ANCHORS. THIS MAY RESULT IN THE CEILING BRACKETS FAILING AND
CAUSE PERSONAL INJURY AND OR PROPERTY DAMAGE.
T
DETAIL T
SCALE 1 : 8
DO NOT ATTACH
THE RAIL ASSEMBLY TO
ONE SIDE OF THE
SCREWS OR ANCHORS
STEP 3: 4FT X 4FT & 4FT X 8FT RACK
VERTICAL RAIL ASSEMBLIES TO CEILING BRACKETS
1. STARTING AT (1) END ATTACHED THE VERTICAL RAIL ASSEMBLIESS TO THE MOUNTED CEILING BRACKETS.
DO NOT TIGHTEN SCREWS AND NUTS YET.
SET THE CORNER RAILS 4FT X 4FT APART FOR THE 4FT X 4FT RACK
SET THE CORNER RAILS 4FT X 8FT APART FOR THE 4FT X 8FT RACK WITH (2) SETS OF CENTER RAIL IN THE MIDDLE.
2. CHECK THE RAILS DISTANCES MATCH THE DIMENSIONS SHOWN BELOW.
CAUTION
PAGE 9