Garage Tek GT7008A, Installation Manual

Page: 5 / 16

72.000in
1828.80mm
48.000IN
[1219.20mm]
REUSE THE DRILL TEMPLATE TO MARK MOUNTING HOLES ON THE CEILING
AA
AB
DETAIL AA
SCALE 1 : 2
DETAIL AB
SCALE 1 : 2
CEILING JOISTS
11/64"
[ 4.5mm]
2 3/8"
[60mm]
DRILL MARKED MOUNTING HOLES
(2) MOUNTING HOLES REQUIRED
PER CEILING BRACKET
MARKED MOUNTING HOLE
WITH PENCIL
MOUNTING HOLE DIMENSIONS
AC
DETAIL AC
SCALE 1 : 10
CEILING
JOIST
CEILING
BRACKET
WOOD
SCREW
DRILL
SUPPLIED
NUT DRIVER
WOOD
SCREW
STEP 1: 4FTX 6FT RACK-FOR CEILING BRACKET INSTALLATION (WOOD JOIST)
WE PROVIDED WOOD SCREWS AND SOLID CONCRETE CEILING ANCHORS FOR THIS INSTALLATION.
PLEASE DETERMINE THE TYPE OF CEILING YOU HAVE BEFORE STARTING.
WOOD JOIST:
A: USE A STUD FINDER TO LOCATE THE CEILING WOOD JOISTS.
NOTE: USE THE DRILL TEMPLATE TO MARK THE MOUNTING HOLES FOR INSTALLATION.
A1: START FROM THE LEFT, PLACE THE DRILL TEMPLATE AND MARK THE (2) HOLES AT CENTER OF THE JOIST LOCATIONS.
A2: FROM THE (1) END MEASURE 72", PLACE THE DRILL TEMPLATE AND MARK THE NEXT SET OF (2) HOLES.
B: PILOT HOLES FOR WOOD JOIST: USE A 11/64" (4.5mm) DIA. DRILL BIT AND DRILL A 2 3/8" (60mm) DEEP HOLE FOR
EACH SCREW.
C: FASTEN THE CEILING BRACKETS WITH THE WOOD SCREW. USE A DRILL & SUPPLIED NUT DRIVER.
PAGE 5
KEEP EACH SET OF CEILING BRACKETS IN A STAIGHT LINE