Garage Tek GT7008A, Installation Manual

Page: 7 / 16

72.000in
1828.80mm
48.000IN
[1219.20mm]
REUSE THE DRILL TEMPLATE TO MARK MOUNTING HOLES ON THE CEILING
AD
AE
DETAIL AD
SCALE 1 : 3
DETAIL AE
SCALE 1 : 3
11/64"
[ 4.5mm]
2 3/8"
[60mm]
DRILL MARKED MOUNTING HOLES
(2) MOUNTING HOLES REQUIRED
PER CEILING BRACKET.
USE A MASONARY DRILL BIT
MARKED MOUNTING
HOLE WITH PENCIL
MOUNTING HOLE DIMENSIONS
CONCRETE CEILING
AF
DETAIL AF
SCALE 1 : 4
DRILLED
HOLE
ANCHOR
AG
DETAIL AG
SCALE 1 : 4
FIG. D2
AH
DETAIL AH
SCALE 1 : 4
CEILING
BRACKET
FIG. D3
AJ
DETAIL AJ
SCALE 1 : 4
DRILL
SUPPLIED
NUT DRIVER
FIG. D4
ANCHOR
STEP 1: 4FT X 6FT RACK-FOR CEILING BRACKET INSTALLATION
(SOLID CONCRETE CEILING)
WE PROVIDED WOOD SCREWS AND SOLID CONCRETE CEILING ANCHORS FOR THIS INSTALLATION.
PLEASE DETERMINE THE TYPE OF CEILING YOU HAVE BEFORE STARTING.
SOLID CONCRETE CEILING:
A: USE THE DRILL TEMPLATE TO MARK THE MOUNTING HOLES FOR INSTALLATION.
A1: START FROM THE LEFT, PLACE THE DRILL TEMPLATE AND MARK THE (2) HOLES.
A2: FROM THE (1) END MEASURE 48", PLACE THE DRILL TEMPLATE AND MARK THE NEXT SET OF (2) HOLES.
B: PILOT HOLES CONCRETE CEILING: USE A 15/32" (12 mm) DIA. MASONARY DRILL BIT AND DRILL A 2 3/8" (60mm)
DEEP HOLE FOR EACH ANCHOR.
C: INSERT (1) ANCHOR INTO EACH HOLE. USE A RUBBER MALLET TO TAP THE ANCHOR INTO THE CEILING.
D: FASTEN THE CEILING BRACKETS TO THE ANCHORS. USE A DRILL AND THE SUPPLIED NUT DRIVER.
SEE ANCHOR INSTRUCTIONS BELOW, FIG D1-D4.
FIG. D1
PAGE 7
KEEP EACH SET OF CEILING BRACKETS IN A STAIGHT LINE