GarageSmart
TM
User’s Manual
29
App Setup
Because the GarageSmart™ app is designed to be used in both Residential and
Commercial use, there are two modes that the GarageSmart™ app can run in,
Classic
mode or
Advanced
mode.
This section will show how to setup the GarageSmart
™
app in
Advanced
mode, using a
User
,
Remote Key
and
Access Code
. In
Advanced
mode a
User
can be granted
access to multiple locations to control multiple doors one at a time or even
simultaneously.
Further information on the differences between
Classic
and
Advanced
can be found
within the
Online Control Panel Manual
, that can be found by logging into your
Online
Control Panel
, then clicking on
Help
.
1. Find and run the GarageSmart
™
app that is installed on your device.
2. The
App Settings
page will automatically be shown; the first time the app is opened
(after installation). If not, f
rom the main screen of the GarageSmart™ App, click the
Settings
icon, then
App Settings
.
Set
App Mode
to
Advanced
and make any other changes as necessary.
