12
GarageSmart
TM
User’s Manual
Router Security Configuration
For the
GarageSmart™ device to receive inbound commands (red arrows below) from the
Internet and the
GarageSmart™ Network,
Port Forwarding
must be setup properly within the
router.
1. Login into your router as this is usually accomplished by typing the Gateway Address
into your web browser.
(1) (2)
If you don’t know the default
Gateway Address
in the
Troubleshooting & Help
section of this manual.
2. Under your routers
Port Forwarding
settings, add the following information:
(3)
a.
IP Address
: Select an available IP Address.
b.
Start Port:
Select
31301
as the Start Port.
E
ach GarageSmart™ device requires a different
Port
when used on the
same network. Example: 31301 for the first device, 31302 for the second
device, 31303 for the third device, etc.
c.
End Port:
This is the same as
Start Port
above.
(4)
d.
External IP Address:
If your router has this setting, set this to 0.0.0.0
e.
Protocol:
TCP
f.
Description, Application Name, or Device Name:
GarageSmart
(5)
Public
Private Network
Router or Access Point
Example
