GarageSmart
TM
User’s Manual
19
8. Confirm that the
GarageSmart™ device has power, by verifying that the
Green
Power LED of the
GarageSmart™ device illuminates when the power is on.
Power LED
(Green)
The
NO/NC AUX
switch can
also be triggered
Locally
by
pressing and holding the
STOP
Button for 5 seconds.
After 5 seconds has passed,
the
NO/NC AUX
switch will
then be energized and
change state, with the Buzzer
sounding simultaneously for
as long as the
STOP
button
is pressed.
To enable this function, the
installer must put a
Jumper
across the
J10
terminal,
located on the top board as
this this option is deactivated
by default and should only be
activated if needed and
communicated to the User.
J10
