Ganz ZN1-V4FN3, Installation Manual

Page: 9 / 35

PixelPro GXi Series ZN1-V4FN3/FN4 Installation Guide
06-2014-B 9
4. INSTALLATION
The installation method of ZN1-V4FN3 and ZN1-V4FN4 is identical.
The installation method of the camera unit differs depending on your bracket type, but the
rest of the overall installation process is the same.
4.1. Camera Unit Installation
There are three different ways to install the camera unit:
- Covertly behind the wall or ceiling by using the covert cover
- Mounted and fixed on the wall or ceiling by using the surface mount bracket
- Mounted and fixed on the wall or ceiling by using the pan/tilt bracket to enable the
camera’s angle adjustment
Covert Installation
1) Drill a hole with 3mm diameters on a desired
spot where the camera lens will be located.
2) Peel off one side of the double-sided tape,
and attach it to the flat surface of the covert
cover by aligning the grooves on the tape
with the screw holes on the covert cover.
tape
groove
Screw hole
(Behind the wall or
above the ceiling)