PixelPro GXi Series
ZN1-V4FN3/FN4 Installation Guide
06-2014-B
22
6.3. Reset
Perform the following procedures to reset your device:
1.
Press the reset button for 2 seconds while the device is in use.
2.
Wait for the system to reboot.
Caution
!
Please do not hold for more than 2 seconds. Otherwise, the camera may be
switched to its Factory Default settings.
.
6.4. Factory Default
Resetting the device back to the factory default will initialize all parameters including the IP
address back to the factory defaults. To reset back to the factory default:
1.
Press the reset button and hold.
2.
Release the button after 10 seconds.
3.
Wait for the system to reboot.
Note
i
The factory default settings can be inferred as follows:
IP address:
192.168.xx.yy
Network mask:
255.255.0.0
Gateway:
192.168.0.1
User ID:
root
Password:
pass
Summary of Contents for ZN1-V4FN3
Page 29: ...PixelPro GXi Series ZN1 V4FN3 FN4 Installation Guide 06 2014 B 29 Camera Unit Unit mm...
Page 32: ...PixelPro GXi Series ZN1 V4FN3 FN4 Installation Guide 06 2014 B 32...
Page 33: ...PixelPro GXi Series ZN1 V4FN3 FN4 Installation Guide 06 2014 B 33...
Page 34: ...PixelPro GXi Series ZN1 V4FN3 FN4 Installation Guide 06 2014 B 34...
