Ganz ZN1-V4FN3, Installation Manual

Page: 12 / 35

PixelPro GXi Series ZN1-V4FN3/FN4 Installation Guide
06-2014-B 12
Surface Installation for pan/tilt adjustment
3) Insert the rotate ring into the bracket by
pressing it into the bracket’s mount ring.
4) Place the camera unit on the pan/tilt bracket.
6) Use the cable clamp optionally if you want
to fix the camera’s cable to a desired spot
with a tapping screw (M4x20).
mount ring
rotate ring
cable clamp
1) Drill a hole on a desired installation surface,
and insert an anchor block into the hole.
2) Fix the pan/tilt bracket by inserting the
tapping screw (M4x25) to be passed
through the screw hole on the bracket and
tightening it into the anchor block.
5) Place the surface mount bracket on top of the
camera, fix the bracket by inserting the tapping
screws (M3x6) into the screw holes on the
bracket by aligning the screw holes with the
holes on the rotate ring on the pan/tilt bracket,
and tighten the screws.