Ganz ZN-M2AF, User Manual

Page: 7 / 28

6
3. Live View
Digital Zoom
Snap Shot
Full Screen
Video Stream change: First stream
Ù
Second stream
Play: Click this button by manually to start the stream
Stop: Click this button by manually to stop streaming
NOTE: It is possible that not all the buttons described below will be visible unless
the Live View page has been customized to display them.
3.1 Video Stream types
H.264 protocols and communication methods
•
RTP ( R eal-time T ransport P rotocol) is a protocol that allows programs to manage
the real-time transmission of multimedia data, via unicast or multicast.
•
RTSP ( R eal T ime S treaming P rotocol) serves as a control protocol, to negotiate the
type of transport protocol to use for the stream. RTSP is used by a viewing client to
start a unicast session.
•
UDP ( U ser D atagram P rotocol) is a communications protocol that offers limited
service for exchanging data in a network which uses the Internet Protocol (IP).
UDP is an alternative to the Transmission Control Protocol (TCP). The advantage of
UDP is that, it is not required to deliver all data and may drop network packets when
there is network congestion. This is suitable for live video, as there is no point in re-
transmitting old information that will not be displayed anyway.
•
Unicasting is communication between a single sender and a single receiver over a
network. This means that the video stream goes independently to each user, and
each user gets own stream. A benefit of unicasting is, in case one stream fails, it
only affects one user.