3
1. Network (RJ-45 PoE required)
The ZN-M2AF connects to the network via a standard network cable, and
automatically detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet). This socket must be used to power the
ZN-M2AF via Power over Ethernet (PoE). The camera auto-senses the correct
power level when using a PoE (Class 2) switch, router or injector.
2. Video output for service monitor
This analog video output is available when installation mode is set to ON. Use
accessory cable to video output.
3. Reset Switch
This switch has 3 functions by pressing time.
1) Switch NTSC / PAL format (less than 1second)
2) System reboot (around 5 seconds)
3) Factory Default Reset (More than 10 seconds)
2. Installation
2.1 Install camera
1) Assembly the bracket for fixing
with wall bracket on Camera with
supplied screws.
2) Fix the wall bracket on place that
user want to install.
3) Connect the Wall bracket and Camera
Summary of Contents for ZN-M2AF
