Ganz ZN-M2AF, User Manual

Page: 6 / 28

5
1. Start a browser (Internet Explorer)
2. Enter the IP address or host name of the camera in the Location/Address field
of your browser. Press Enter.
3. Login dialog will appear when the camera is accessed for the first time.
4. The default user name is
ADMIN , and password is 1234 .
5. The camera’s Live View page is now displayed in your browser.
Note: The layout of the live view page in the camera may have been customized to
meet specific requirements. Consequently, some of the examples and
functions featured here may differ from those displayed on your own Live View
page.
2.4 Accessing the camera from the Internet
Once installed, the camera is accessible on the local network (LAN). Configure
the router/firewall to allow incoming data traffic to access the camera from the
Internet. For security reasons this is usually done on a specific port. Please refer
to the documentation for router/firewall for further instructions.
2.5 Adjusting the Image and Focus
With Analog Video output
1. Open the Live View page in your web browser.
- Select the Setup tab, and open the Installation page.
- Select the ‘Video Format'.
2. Connect analog monitor to the VIDEO OUT (BNC) on the cable.
- Adjust camera angle.
With Web Browser
1. Open the Live View page in your web browser.
- Select the Setup tab, and open the Video -> Camera page.
- Click ‘Lens Adjustment’ .
2. Set the desired Zoom position.
3. Click ‘One Push Focus’ button for adjust focus automatically or set focus manually.