22
2.1.3 Action Settings
Define the event action to take when the event set occurs in Action Setting.
1.
Click the
button to add a new action item.
2.
Set each action want to perform when an event occurs. Please refer to the Action setting
Guide for the types of actions supported and how to set them up.
2.1.4 Finish setup
1.
Click the
button at the very bottom to save intrusion detection event settings
after setting up the event, action in the event action rule set page.
2.
If everything is set up correctly, you can see the new event in the list on the Intrusion
Detection application screen.
2.1.5 Filter settings (optional)
Schedule and Combined Rule filters can be used to set up event filters to drive actions. The
schedule and Combined Rule filter settings described below are not required to configure an
action rule, so you only need to set them if necessary.
