ձ
Lens mount
A suitable type CS mount lens may be attached. C mount lenses can be attached using a
C/CS mount adapter.
ղ
Back focus lock screw
A ALLEN WRENCH can be inserted here to stabilize the lens mount using a screw to
adjust the distance between the lens mounting surface and the imaging surface. Refer to
“
Lens Mounting: Back Focus Adjustment
” for adjustment.
ճ
Camera mount area
The camera can be mounted using either the top or bottom of the main body. Use 1/4 - 20
screw for mounting.
մ
VIDEO OUT (Video output) terminal
This is an output terminal for the video signal. (BNC type)
յ
Lens terminal
4 Pin connector for an auto iris lens. Refer to “
Lens Mounting: Wiring Connector
” for wiring.
ն
RS485 Terminal switch
Use this when connecting an external device using the external control terminal of this
device.
ON: Terminal with 100
Ω
. OFF: No terminal
շ
Power indicator light
This lights up when powered on.
ո
Switch for function settings
This is a switch for the function settings. This is used when a menu is displayed and
settings are determined.
For details, refer to “
Settings for Various Functions: Settings Operation
”.
չ
Power input terminal
This is the input terminal where power is supplied. This uses both 12 V DC and 24 V AC.
պ
External control terminal
This can be used to connect an RS-485 I/O compatible terminal. It can also be used for an
external control terminal for the DAY & NIGHT function. For details, refer to "
External
Control Signal Terminal
".
Component Names and Functions
En-5
Figure 1
Top Front View
Rear View
