3. An arrow is displayed on the screen. Determine the position of the mask to be created using
this arrow.
First, move the arrow to upper left of mask to be created and select the position with the
switch.
Move the arrow next to the lower right, and mask will be created by selecting the position
with the switch.
MASK ERASE
This erases the created mask.
Method to erase a mask
1. Move the cursor to "MASK ERASE”.
2. Press the switch in this position to erase the mask.
Note)
㻃
If multiple masks have been created, the masks are erased in the opposite order
the masks were created.
(3-7) TITLE
This creates text and sets it to display on the screen.
Figure 9-7 TITLE menu
TITLE
This sets the display of text ON/OFF.
TITLE EDIT
This edits the text to be displayed. Up to 16 characters can be displayed.
Method to create a title
1. Set "TITLE" to "ON".
2. Move the cursor to “TITLE EDIT” and press the switch to display the “TITLE EDIT” screen.
3. Move the cursor to the text you want to display and press the switch. The selected text is
displayed in the editing area.
4. Repeat the above steps until editing is complete.
5. Move the cursor to “BS” and press the switch to erase one character.
(3-8) CRISPNESS
This sets edge enhancement. It sharpens the image in the “+” direction and softens the image
in the “-” direction.
Figure 9-8 CRISPNESS menu
En-18
TITLE
TITLE
→
ON
TITLE EDIT
→
RETURN END
TITLE EDIT
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
a b c d e f g h i j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 - /
RETURN BS
FUNCTION SET.
SYNC SELECT
WHITE BALANCE
CHROMA
GAMMA
E-ZOOM
CRISPNESS
㻃 㻃
䊲
1
PRIVACY MASKING
TITLE
RETURN END
TITLE
TITLE
→
ON
TITLE EDIT
→
