![background image](http://html1.mh-extra.com/html/ganz/digimaster-dr16h/digimaster-dr16h_instruction-manual_561010017.webp)
17
Product Description
2. Rear Panel (8 and 16-channel models)
A. CAMERA INPUTS and LOOP OUTPUTS :
Connect up to 16 BNC camera inputs. 16 Hi-Z Loop outputs can be used for connection to other equipment.
B. COMPOSITE AND S-VIDEO MAIN MONITOR CONNECTIONS :
All main monitor outputs can be used at the same time, if more than one main monitor is required.
C. SPOT MONITOR OUTPUTS : Up to 4 spot monitors can be connected and individually configured as necessary.
D. ALARM INPUTS : Up to 16 alarm inputs can be connected and configured as high or low
inputs with common ground.
E. ALARM OUTPUTS : Up to 16 alarm inputs can be connected and configured as high or low
outputs with common ground.
F. RELAY OUTPUTS : Up to 4 Relay outputs can be connected and configured as high or low
outputs with common ground.
G. RS-485 : Can connect to PTZ camera and controller by two RS-485 connectors.
H. AUDIO INPUTS & OUTPUTS
: Up to 4 audio inputs and one audio output can be connected as necessary.
I. VIDEO SIGNAL SWITCH
: Can change video input signal type between NTSC and PAL formats.
USB PORT
: Can connect a USB mouse or other USB device for archiving.
J. HDMI : Can output high-definition video to any HDMI-capable monitor.
VGA : Can output to any type of VGA monitor.
K. RS-232 : Serial port (used for initial factory programming only).
LAN : Connect to a hub, switch, or router with access to a Local Area Network (LAN) or the Internet.
L. POWER : AC power inlet, to be used with provided AC power cable.
K
I
J
L
D
G
A
B
C
E
F
H
• During installation, please install unit while System Power is disconnected.
•
When connecting one or more microphones to the audio input jack(s),
please use with a microphone system or some other kind of amplification.
•
Without amplification, a line-level input from a microphone is too low to use.
Tip